After quite a few requests i have finally created support forums to address suggestions/bugs and problems regarding FSWizard

Please submit all your requests in the appropriate sub forum over here http://zero-divide.net/index.php?page=forums

The ONLY FREE CNC Speeds and Feeds Calcualtor

Confidently calculate cutting conditions for hundreds of work-piece materials and of combinations of tooling types and coatings.

• Accurately Estimate cutting forces involved in machining process and prevent tool breakage.
• Estimate machine power requirement and help choose best tool for the job.
• Suggest safe and practical Axial and Radial engagement values.
• Compensate for reduced-shank, long and extra-long tools.
• Improve cycle times and tool life
• UNIQUE feature that allows to set comfortable levels of cutter torque and deflection and prevent cutter breakage.
• Ideal for use as your Dynamic / Thoroidal / Truemill calculator

Please visit the project page for download link, support and instructions.
http://zero-divide.net/index.php?page=FSWizard_SA

Optimizing Peck Drilling for Deep Holes

Peck drilling is often necessary when machining deep holes. However, with the correct feed and speed settings, pecking is unnecessary for depths up to:

• 3× diameter for standard drills
• 5× diameter for high-performance parabolic drills

For deeper holes:

• Up to 10× diameter → Up to 5 pecks for regular drills, and up to 3 pecks for parabolic drills
• Beyond 10× diameter → Constant pecking is required:
  • 0.5–1× diameter per peck for regular drills
  • 1.5–2× diameter per peck for parabolic drills

Since programming requires specifying a peck amount, here are the recommended values:

Read More 

Here is a list of Okuma G and M codes i got from the manual

Note Some codes may not be supported by your machine, all information is given as is and i dont give a ... if you break something.

Information given here is correct to the best of my knowlege

Read More