avatar

By Blue_Chips

April 9, 2015, 7:10 pm

Show lathe compound infeed.

Eldar, Understanding that professinal machinist would have no need for this but likely there are a number of non-professional machinist using HSMA that would find this of use. I know of at least one :D Display with thread data the lathe compound infeed amount and angle of compound, generally 29.5º

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

April 10, 2015, 11:34 pm

Hi, I remember now somebody was asking for that. I will try to squeeze it in next update. Thank you.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here