By Blue_Chips
Garbled text
Hi Eldar,
Another display issue :( for you
Here is a screen shot showing what I'm talking about.
Ken
Also, it seems that the "refresh" button should zero all fields for a clean slate rather then set to some arbitrary default figures, the way it is starts out a bit confusing to me.
Thanks
Ken
Eldar Gerfanov (Admin)
Hi,
It seems like there is just not enough space on the list horisontally to fit all the text.
Some text needs to be cropped and it just couldnt do it intelligently enough.
While i am trying to find a better solutuon you could try to hide some columns you dont need very much.
I see that Brand/Series name columns are very wide. I am sure if you hide those or make text shorter, everything will be readable.
I will look into that.
Regarding Reset button not resetting thigs to zero, but to default.
This is just how it is designed to work.
Thanks!
Blue_Chips
Eldar,
"This is just how it is designed to work."
That reminds me of what OneCNC always uses/says :)
OK,will do
Thanks
Ken
Eldar Gerfanov (Admin)
"This is just how it is designed to work."
That reminds me of what OneCNC always uses/says :)
OK,will do
Thanks
Ken
Lol perhaps I should have expanded on that.
My calc simply can not have zero values where there aren't supposed to be zeroes.
And empty field also means zero.
I specifically check every value to be within a range and bring it to default if it is not.
If I did not, an unfilled by user field would screw up everything. And sometimes it does.
In fact when you hit reset all fields go to "empty" and then claculator populates them agin accoring to your tool/material combination.
It is not like I dont want or appreciate your feedback. Believe me I do!
It is just there is no other way it would ever work in this particular case :)
Blue_Chips
Understood,
Always seems easier when one is on the other side of the table :)
Thanks